It is currently Tue Mar 19, 2024 3:12 am

All times are UTC - 5 hours




 Page 1 of 1 [ 2 posts ] 
Author Message
 Post subject: "Embedded erase timout." or "Error D6" timeout w/ 8mbit cart
PostPosted: Wed Dec 07, 2011 5:13 am 
ERROR AT LINE 0
User avatar

Joined: Tue Aug 05, 2003 9:55 am
Posts: 1042
Location: Cleveland, Ohio
Hi Guys,

One of the recent batches of 8mbit flash cartridges has flash ICs that take a about 2 seconds longer to erase than the previous lots.

Unfortunately when I wrote the last software revision and programmer firmware, I set the erase timeouts lower than they should be and these carts are triggering some difficulty programming with the USB interface and the current Maxflash Studio software.

If you get either of these errors when erasing/programming your carts, follow the procedure below to update your software and programmer firmware so they don't prematurely report erase errors.

The errors you might see are:

[USB Task] Error performing read operation! Timed out waiting for command D6 completion! (15000ms)

or

[USB Task] Error performing read operation! Embedded erase timout. Task aborted!

To update both the software and programmer firmware, follow these directions:

First download and install the Maxflash Studio update here:

http://www.atarimax.com/flashcart/docum ... taller.exe

Run and install the update. After installing, run the new Maxflash Studio application. Click
the Help->About menu option and verify you are now running version 1.1 or higher of the
Maxflash Studio suite.

Then go to Tools -> Update Programmer Firmware -> Automatic Upgrade to Minimum Required Version

Once those updates are installed, try making a new workbook, attaching one of your
flash cartridges and programming it.

Steve


Offline
 Profile  
 
 Post subject: Re: Error performing operation -Solved-
PostPosted: Wed Mar 08, 2023 10:02 am 

Joined: Wed Mar 08, 2023 9:05 am
Posts: 1
Hello Steve,

I have the problem that it breaks off after 50% writing. I use version 2.30. I tried it on win11,10,7 and XP. When I delete the module there is no error. I tried it with just one file. Always the same result. I ordered the 8Mbit module last year. I don't remember if it ever worked.
It doesn't work in the emulator either. Do you have any idea ?

Logfile:
[Image Database Manager] Initialized, 1245 image signatures loaded.
[USB Manager] Initialized and running.
[USB Manager] USB driver version 1007
[USB Manager] Programmer connected.
[Program Cartridge] Identified attached cartridge. "Maxflash 8Mbit Cartridge"
[Program Cartridge] Programming Maxflash 8Mbit Cartridge
[USB Task] Cartridge erase...
[USB Task] Programming... 1%
[USB Task] Programming... 2%
[USB Task] Programming... 3%
[USB Task] Programming... 4%
[USB Task] Programming... 5%
[USB Task] Programming... 6%
[USB Task] Programming... 7%
[USB Task] Programming... 8%
[USB Task] Programming... 9%
[USB Task] Programming... 10%
[USB Task] Programming... 11%
[USB Task] Programming... 12%
[USB Task] Programming... 13%
[USB Task] Programming... 14%
[USB Task] Programming... 15%
[USB Task] Programming... 16%
[USB Task] Programming... 17%
[USB Task] Programming... 18%
[USB Task] Programming... 19%
[USB Task] Programming... 20%
[USB Task] Programming... 21%
[USB Task] Programming... 22%
[USB Task] Programming... 23%
[USB Task] Programming... 24%
[USB Task] Programming... 25%
[USB Task] Programming... 26%
[USB Task] Programming... 27%
[USB Task] Programming... 28%
[USB Task] Programming... 29%
[USB Task] Programming... 30%
[USB Task] Programming... 31%
[USB Task] Programming... 32%
[USB Task] Programming... 33%
[USB Task] Programming... 34%
[USB Task] Programming... 35%
[USB Task] Programming... 36%
[USB Task] Programming... 37%
[USB Task] Programming... 38%
[USB Task] Programming... 39%
[USB Task] Programming... 40%
[USB Task] Programming... 41%
[USB Task] Programming... 42%
[USB Task] Programming... 43%
[USB Task] Programming... 44%
[USB Task] Programming... 45%
[USB Task] Programming... 46%
[USB Task] Programming... 47%
[USB Task] Programming... 48%
[USB Task] Programming... 49%
[USB Task] Programming... 50%
[USB Task] Error performing operation! Embedded program timeout. Task aborted!
[Program Cartridge] Fatal error: User Abort.
Ende
Greetings Brandhotte2

I read in another post that the chips should be exchanged for one another. Worked. :D

Greetings Brandhotte2


Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 2 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 18 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: