Atarimax Product Discussion Forums https://atarimax.com/flashcart/forum/ |
|
TCPIP Express https://atarimax.com/flashcart/forum/viewtopic.php?f=5&t=242 |
Page 1 of 1 |
Author: | Stephen J. Carden [ Thu Mar 31, 2005 7:58 pm ] |
Post subject: | TCPIP Express |
Check out TCPIP Express using the APE interface. Steve Tucker has a line on his main web page. Or Telent to TCPIPExpress.dyndns.org port 8890 for the APE interface or 8888 and 8889 for Lantronix Connection. Have fun Stephen J. Carden |
Author: | backtoskooldaze [ Tue Apr 05, 2005 10:12 am ] |
Post subject: | Excellent Stuff |
Excellent Stuff Nice One Using Ape cable for Telnet is great:) |
Author: | Stephen J. Carden [ Sun Apr 10, 2005 8:29 pm ] |
Post subject: | |
Well Bell south. has been playing with my tcpip address.. So I Payed the extra bux's for a fixed IP. So for any trouble you may have had in getting threw.. I am building 2 more machine's to also run as slaves.. Anyway check it out. Stephen J. Carden |
Author: | TXG/MNX [ Mon Apr 11, 2005 7:47 am ] |
Post subject: | |
Are you talking about a new waitcall for PRO! using the lantronix interface. I have a registered PRO! 472 node and an lantronix interface, would be nice when I could bring this board back on-line on the internet Let me know... TXG/MNX |
Author: | Stephen J. Carden [ Mon Apr 11, 2005 7:13 pm ] |
Post subject: | |
BBS Express Professional is dead as far as I am concerned. Yes, I have waitcall.cmd for the lantronix and the ape interface. 78% of the bbs was re written in order to support just DTR and the way tcpip functions. The Mod's that I have written will ONLY work with TCPIP Express. But don't fret.. there are a large part of backward compatability. message bases structor ect. most all the old cmd's should work unless they do a carrir detect. and not a dtr check. Stephen J. arden |
Author: | densonj [ Fri Apr 29, 2005 8:31 pm ] |
Post subject: | TCPIP Express! |
I just bought a Lantronix myself and am looking forward to trying it out. I will be purchasing the TCPIP Express! from you! |
Author: | TXG/MNX [ Mon May 02, 2005 6:07 am ] |
Post subject: | |
What's new in TCP/IP express compared to PRO! ? |
Author: | Bumzy [ Sat Jun 04, 2005 8:47 pm ] |
Post subject: | |
Just got done logging in and looking around, looks nice... Which Lantronix box are you guys working with? |
Author: | densonj [ Sun Jun 05, 2005 8:44 pm ] |
Post subject: | |
Bumzy wrote: Just got done logging in and looking around, looks nice...
Which Lantronix box are you guys working with? I'm using the UDS-10. I think Stephen is using the UDS-100. I also tried an MSS-100 but without complete success. The 8-bit (a "real" atari w/ HD)would acknowledge the connection but go no further with it. My UDS-10's work real nice! Initial connection, session and disconnect/reset work very nicely. |
Author: | Stephen J. Carden [ Mon Jun 06, 2005 3:29 pm ] |
Post subject: | |
I am using a uds200 |
Author: | Bumzy [ Mon Jun 06, 2005 6:18 pm ] |
Post subject: | |
I see that you have 8 slave ports connected. If I was to get a Lantronix ETS8P which has 8 serial ports how, or would, I be able to connect them all? The PR connection allowed 2 and the 850 had 4 serials but could you connect more than one 850???? |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |