Of course ! Great idea, I can make one of those easily myself. I was thinking in a different direction (PCB, headers etc.) but this is it
Reversing....I'll just have to put some clear marks on it
| Atarimax Product Discussion Forums https://atarimax.com/flashcart/forum/ |
|
| Transcend module and IDE2USB https://atarimax.com/flashcart/forum/viewtopic.php?f=7&t=1121 |
Page 1 of 1 |
| Author: | Level42 [ Wed Jul 27, 2011 3:00 pm ] |
| Post subject: | Transcend module and IDE2USB |
OK, granddaddy Finally bought a MyIDE+Flash cart. I've used A8 machines since the early 80s, so not a complete newbie. Following the manual I succesfully set-up the cart running a Transcend 128 module. Now copying stuff from laptop to cart using sio2 pc but man is it slow ! I own a nice ide2 USB kit so I would like to connect my Transcend module to it, but both the kit interface and the transcend module have female connections. Are there adapters for this ? |
|
| Author: | beamrider [ Wed Jul 27, 2011 4:46 pm ] |
| Post subject: | Re: Transcend module and IDE2USB |
Can't not say definitely that they do not exist but I have never been able to find that particular gender changer. |
|
| Author: | classics [ Wed Jul 27, 2011 4:54 pm ] |
| Post subject: | Re: Transcend module and IDE2USB |
I'm hesitant to recommend one because its possible to reverse the IDE pinout if the connectors are not oriented correctly on the cable. Here is one, but with the caveat that I have not tried it and if its wired wrong it will will probably damage the IDE module. http://cgi.ebay.com/2-Inch-40-Pin-IDE-P ... 2311e4c91b Steve |
|
| Author: | Level42 [ Wed Jul 27, 2011 6:09 pm ] |
| Post subject: | Re: Transcend module and IDE2USB |
Of course ! Great idea, I can make one of those easily myself. I was thinking in a different direction (PCB, headers etc.) but this is it Reversing....I'll just have to put some clear marks on it
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|