mr-atari wrote:
In fdisk you must activate image-mode.
save&exit.
hold start on powerup and you enter the image-menu.
A screen like this will appear.
0001<CBN>name_29_characters S
4-digit hex-number (joystick up/down left/right, fire=boot)
< copy from image to floppy (press fire), "Y" to confirm
C erase name (press fire), then do N 'save name' to confirm.
B boot (press fire)
N save name (press fire)
> copy from floppy to image (press fire), "Y" to confirm. [tip:enter name first]
"name_29_characters" (keyboard, joystick left/right, NO function keys supported!)
s Density of image. changeable s->m->d->s (fire) Only change this if you need to!
To confirm changes in density, then do N 'save name'
you first need to copy disk from d1/ape to imagespace or use the
pctool to copy atr's to imagespace.
cheers,
sijmen.
I did, but at my record of 16megas ATR, is not in the second partition. and the first partition is the mydos. There will not be any way to just copy the files contained in the ATR?
I attached some pictures fdisk, and the menu for recording.
Greetings