It is currently Tue Nov 19, 2019 3:06 pm




 Page 1 of 5 [ 71 posts ]  Go to page 1, 2, 3, 4, 5  Next
Author Message
 Post subject: xegs rom basic
PostPosted: Sun May 06, 2012 3:02 pm 

Joined: Thu May 03, 2012 3:26 pm
Posts: 31
hi

I wanted to build me a myide inyterna to directly load the games from compactflash

but to do this needs to replace l os, I have dissaldato the rom where cè l os the basic and misslecombact.
I have prepared an eprom 27c256 comns inside a file you contain l os, bases, misselcombact, but I don't have the pinotu of the rom atrari that and a c101687, turning online from all the parts I/you/they have succeeded in finding, the pin out of the rom of the xe / xl however these are not from 32k but from 16, therefore enough one 128 and the pin and different.
does someone know where I can find the pinout of the c101687-001?
thanks

I have taken the file from this viewtopic.php?f=7&t=358 I have used myide that present xges-os in the file zip, but it doesn't work, video is viola.
me put 27c256 directly on stoker, pin different out from c101687 I believe.

you excuse me for my English, me to use translator


Offline
 Profile  
 
 Post subject: Re: xegs rom basic
PostPosted: Mon May 07, 2012 1:21 am 
User avatar

Joined: Sun Nov 02, 2003 8:15 am
Posts: 1376
Location: netherlands
The 27c256 is pin-compatible with the XEGS-rom.
So you can remove the rom, and put the eprom in.

After removing the rom, Did you test the system with a 28p socket and the (removed) atari-rom?
That should work before you try the XEGS-MyIDE-eprom.

I can send you a new 4.7 beta version for XEGS is you want.

Later,
Sijmen.


Offline
 Profile  
 
 Post subject: Re: xegs rom basic
PostPosted: Mon May 07, 2012 6:16 am 

Joined: Thu May 03, 2012 3:26 pm
Posts: 31
I have removed rom atari and me I have tried rom atari on 28p socket, to see if you contact to be ok.

must the file inside 27c256 be xegs + basic+game?

I use linux

my command is : cat XEGS_OS.ROM BASICREVC.ROM missile_command.rom > xegside.rom

is it ok?

grazie


Offline
 Profile  
 
 Post subject: Re: xegs rom basic
PostPosted: Mon May 07, 2012 6:30 am 

Joined: Thu May 03, 2012 3:26 pm
Posts: 31
do I copy this lines inside the 27c256 and I insert eprom in the stoker ok?


Offline
 Profile  
 
 Post subject: Re: xegs rom basic
PostPosted: Mon May 07, 2012 12:01 pm 

Joined: Wed Feb 29, 2012 7:02 am
Posts: 75
In linux, why are you using the cat command and not the dd command?
Just curious.


Offline
 Profile  
 
 Post subject: Re: xegs rom basic
PostPosted: Mon May 07, 2012 12:58 pm 

Joined: Thu May 03, 2012 3:26 pm
Posts: 31
io ho sempre usato il comando cat , ho programmato eprom anche per un commodore e un drive commodore 1541 e sempre usato cat

ho inserito dentro la 27c56 il file che mi hai mandato e adesso va :)

mi compare la scritta my id e poi mi chiede il file per il boot ,

questo file va inserito dentro la compactflash?
che file devo inserire ?
grazie


Offline
 Profile  
 
 Post subject: Re: xegs rom basic
PostPosted: Mon May 07, 2012 1:04 pm 

Joined: Thu May 03, 2012 3:26 pm
Posts: 31
what compact flash do you recommend me?

is it better inside on 6502 or in the taking cartridge?

I have seen this 12,90 Euro on ebay or * scandisk Compact Flash 8 GB


Offline
 Profile  
 
 Post subject: Re: xegs rom basic
PostPosted: Mon May 07, 2012 1:20 pm 

Joined: Wed Feb 29, 2012 7:02 am
Posts: 75
My translator sucks big time and tells me it cannot translate your post.
I also use Puppy linux (Lucid) as my OS and have used the dd command to make images of physical floppy disks and floppy disks from images.
Puppy is a one user linux that does not use sudo to be able to use the commands.
But I will not delve into linux further as this is in fact an Atari forum!

Anyway, hope I helped you in a small way.
Also, do not forget that in linux using the cat command that if you are writing to a mounted device, you have to umount it to get the data written to the device.
Do NOT use dd on a mounted device!!
I learned the hard way trashing two hard drives in the process!

As to the compact flash, a two gig one will hold most everything Atari for you. And since you are restricted to 65535 sector partitions, there is more than enough room on a 2gig one.


Offline
 Profile  
 
 Post subject: Re: xegs rom basic
PostPosted: Mon May 07, 2012 1:29 pm 

Joined: Thu May 03, 2012 3:26 pm
Posts: 31
sorry i wrong

I have always used the command cat, I have also programmed eprom for a commodore and a drive commodore 1541 and always used cat

I have inserted inside the 27c56 the file that you have sent me and now it goes :)

it appears me the writing my id and then he/she asks me the file for the boot ,

must this file be inserted inside the compactflash?
what file must I insert?
thanks


Offline
 Profile  
 
 Post subject: Re: xegs rom basic
PostPosted: Tue May 08, 2012 12:30 am 
User avatar

Joined: Sun Nov 02, 2003 8:15 am
Posts: 1376
Location: netherlands
I use Transcend, Lexar, Dane-elec and no-name-brands.
(do NOT use kingston)

The manual is not in spanish, sorry, but please read the setup page.
viewtopic.php?p=6326#p6326

To transfer stuff (linux) to the CF you need to myidetool.exe, found in the lba2-manager.zip
I use windows, not linux, so please don't ask how it works under linux :-(

Grtz,
Sijmen.

P.S. Sequence is: 8k BASIC, 8k Missile Command, 16k BIOS = XEGS-OS


Offline
 Profile  
 
 Post subject: Re: xegs rom basic
PostPosted: Tue May 08, 2012 2:04 am 

Joined: Wed Feb 29, 2012 7:02 am
Posts: 75
I do not know if this will help, but if one has linux as their OS and wants to run a windows program, just install wine on linux.
It is sort of a windows interface for linux that allows one to run windows programs.
I have ran Ape successfully with it as well as MaxFlash Studio.


Offline
 Profile  
 
 Post subject: Re: xegs rom basic
PostPosted: Tue May 08, 2012 6:01 am 

Joined: Thu May 03, 2012 3:26 pm
Posts: 31
you excuse me for in trouble :)

I can use windows on other pc.

but I have not understood that file I must put inside compact flash to make to work it.

sorry:)


Offline
 Profile  
 
 Post subject: Re: xegs rom basic
PostPosted: Tue May 08, 2012 9:25 am 
User avatar

Joined: Sun Nov 02, 2003 8:15 am
Posts: 1376
Location: netherlands
No problem :-)

You need no file for the CF, the BIOS does all the work.
But you need to configure the CF-card for usage with the IDE-menu (fdisk on old bios)

Did you use the 4.7 beta?
Press HELP to enter the IDE_menu.
Follow the quickguide to make it bootable.
You need to have MyDOS (or other DOS) in D1:

-------------------------
The older 4.3I version:
Boot into BASIC then type BYE/enter for FDISK.


Offline
 Profile  
 
 Post subject: Re: xegs rom basic
PostPosted: Tue May 08, 2012 11:46 pm 

Joined: Thu May 03, 2012 3:26 pm
Posts: 31
can I use adapter ide / sd?

as this http://www.ebay.it/itm/ADATTATORE-CONVE ... 1c26ab71b7


Offline
 Profile  
 
 Post subject: Re: xegs rom basic
PostPosted: Wed May 09, 2012 12:30 am 
User avatar

Joined: Sun Nov 02, 2003 8:15 am
Posts: 1376
Location: netherlands
Yes that will work with the new MyBIOS.

Here is one for 6 euro.
http://www.ebay.nl/itm/New-Secure-Digit ... 416512643b

Before you buy, does your interface now work?

Later,
Sijmen.

Avere una bella giornata e fino a domani :-)


Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 5 [ 71 posts ]  Go to page 1, 2, 3, 4, 5  Next


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

cron