THOMASSU63 wrote:
FAT32 Loader works funny. Sometimes when I load an ATR image it uses OSB-load even though it isn't marked as such. Maybe 50% of the times this happens. Nothing seems to happen when I press ctrl-O, it still uses OSB-load. Last time it was Yoomp.atr. This happens when I don't use MyBios. Since MyBios on my machine seems to be less compatible than without I usually don't use it for games.
MyBios works very poorly when used with games. Almost always the soft reset function stops working. And Shift-ctrl-1 and 2 never works when used with Image space.
I think you change into swedish character set using Shift-ctrl-3 (or maybe it's just ctrl-3) with this ROM version. I guess both the Loader and MyBios doesn't like this. The loader seems to first display square brackets around OSB, but as soon as you move your cursor keys they display like the swedish åäö. But Yoomp.atr didn't have any special characters in it's path, so I'm confused why this would load as OSB.
/Thomas
Ok, I flashed my 130xe with this swedish ROM.
(Do you know the source or origin of this chip?)
SHIFT+CONTROL+1/2/3/4 works nicely in image mode.
Also in normal mode it disables the correct IDE-partition.
In the FAT-loader, brackets stay brackets, tried CONTROL+O on .XEX files
No problems.
loaded yoomp.atr, works fine too.
.ATR files are loaded with the OSB-rom, so that is normal.
So, back to square one....
What firmware is your CLPD running?
My Maxflash Cartridge Studio says: Cartridge Hardware version #00000005
When I select: cartridge/program/MyIDE-II Display Hardware Version.
(This is the latest update needed for my 800XL with bad timing-signals)
Later,
Sijmen.
BTW:
I get the selftest in swedish, so the flash is ok.
But shift+control+1/2/3/4/etc does not switch to the other character set.
This is without the MyIDE-][ inserted.
Also:
MyBIOS has it's own keyboard-routine, so disabling/enabling the char.set wont work anyway.